How To Maintain Your Salt or Fresh Water Pool
Pools differ, not only in size, construction and function but also in content. Some folks have fresh water pools while others have salt water pools. Both fresh and salt water pools also vary in their mode of maintenance. Fresh water pools are pretty easier to maintain than salt water pools. This is because salt water pools are more vulnerable to developing certain troubles unlike the fresh water pool.
A salt water pool has chlorine generator. A chlorine generator is a salt water device that is responsible for translating salt into hypochlorous acid through the process of electrolysis. If you own or are deliberating about possessing a salt water pool, you should understand that the chlorine generator should be cleaned all the time in order to slow down the store up of any minerals.
If your chlorine generator stops functioning, your pool will be prone to contamination. The chlorine generator is practically responsible for ensuring that your pool is treated at all times.
Another area of your salt water pool that is susceptible to break down is the pump. If you do not clean the pump from time to time, salt can build up and crystallize around the pump, hence impairing its performance. You may end up having to change your pumps all together thereby evoking extra cash to be spent.
You should also fathom that fresh water pools are not as vulnerable to algae growth as much as salt water pools are. You will therefore need to pay extra care to algae growth. Salt water pools also have the predisposition to impair the pool’s inner wall if it is not correctly maintained.
Adding Chlorine Stabilizer To Your Swimming Pool
What is Chlorine Stabilizer? If you use pool shock or any other type of unstabilized chlorine to sanitize your pool then you are wasting chlorine. You can get your chlorine to last much longer and be a lot more efficient by using chlorine stabilizer.
Chlorine Stabilizer is an organic compound and it’s purpose is to keep the chlorine in your swimming pool lasting longer. It keeps it in there by not letting the chlorine get oxidized by the sun.
Add chlorine stabilizer at the beginning of the pool season. Keeping your stabilizer at 40ppm will ensure proper chlorine stabilization. Keep a close eye on it since your stabilizer levels and rise and fall due to water loss or rising by adding stabilized chlorine products.
Here Is How You Add Chlorine Stabilizer To Your Pool 1. First you must clean your filter out. Just backwash your filter or rinse your cartridge if you have a cartridge filter.
2. To get 40ppm in your pool, most products require you to add 1lb. of stabilizer per 3,000 gallons of pool water. Not all products are the same, check the directions or ask your local pool supplier where you bought it from.
3. We are going to add the stabilizer to your filter system by SLOWLY pouring the product into the skimmer allowing it to pass through your pool filter system.
4. Now keep your filter running for about 24 hours or more and do not backwash your filter during this time.
Why do you add chlorine stabilizer to your filter system and not directly into the pool? Because chlorine stabilizer dissolves very very slow by adding it to your pool directly will cause it to lay on the bottom of your pool for a long time.
If you have any problems or additional questions we advice to contact your local pool supplier.
Building your Own Pool Solar Heaters - Easy and Worth it!
Are you ready to build your own pool solar heater and extend your swim season? Do you want to get your heater and save money doing so? You can do this and more because the pool solar heaters that you can build are also very environmentally safe because they do not waste energy.
You will be able to save a nice sum of money and you will have your own pride of doing it yourself. It is not hard to do and it will do the same or better job than a heater you would buy. Here is what you need to know about putting together your solar pool heater.
First, there are some things you will need to purchase. Get yourself between 100 and 150 feet of black tubing that is about one half inch in diameter. Also, get some pvc piping, around 15 feet that will fit nice and tight into the end of the black tubing. You will also want to pick up a shut off valve to put on the pvc pipe.
You need to get a pump as well. This will be how you get the water from the pool into the tubing and back into the pool at a higher temperature. You want a pump that is strong enough to move the water out of the pool and through the tubing, but nice and slow. This will allow it to heat up more.
Next, you need to get a few two by fours and some brackets to hold them in place. The idea is to attach the black tubing to the two by fours by running it back and forth through them. You have to do this without kinking the tubing, but you want it to be nice and long.
You will want to mount this part of your heater on a rooftop that is in direct sunlight, a shed, a barn, a garage, or anywhere else that is in direct sunlight. The hotter this gets the better. It will heat the water inside and if you have it pumping nice and slow you will get a nice flow of hot water bringing your pool up to the temperature you want.
The last step is to put the pvc pipe on each end of the black tubing. This is where the water will return and be sucked out of the pool. Put the shut off valve on the return side and mount the pump on the side that will suck the water out.
When the water leaves the pool and is sent up through the black tubing nice and slow it will be heated to a nice hot temperature. Then, it will return to the pool and help you get the desired temperature you want for your pool day. This will also increase your swimming season and all with pool solar heaters.